SenTech STC-A33A Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 53
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
Specifications
43Tele: (972) 481-9223; Toll Free (US): (877) 736-8324www.SentechAmerica.com
GigE Power Plus Models
Monochrome
Color
STC-GE33OX
STC-GEC33OX
STC-GE83OX
STC-GEC83OX
STC-GE152OX
STC-GEC152OX
STC-GE202OX
STC-GEC202OX
Resolution: VGA (0.3 Megapixel) XGA (0.8 Megapixel) SXGA (1.4 Megapixel) UXGA (2 Megapixel)
Image Sensor:
1/3” CCD (ICX424AL)
1/3” CCD (ICX424AQ)
1/3” CCD (ICX204AL)
1/3” CCD (ICX204AK)
1/2” CCD (ICX205AL)
1/2” CCD (ICX205AK)
1/1.8” CCD (ICX274AL)
1/1.8” CCD (ICX274AQ)
Signal Format:
Progressive: Monochrome or Color Progressive: Monochrome or Color
Frame Rate:
90fps 36fps 19fps 15fps
Active Picture Element:
648 (H) x 494 (V) 1024 (H) x 768 (V) 1360 (H) x 1040 (V) 1624 (H) x 1236 (V)
Vertical Frequency:
89.91 Hz 36.42 Hz 19.26 Hz 15.32 Hz
Horizontal Frequency:
47.2028 kHz 28.9907 kHz 20.5688 kHz 19.1761 kHz
Pixel Clock Frequency:
36.8181 MHz 36.8181 MHz
Sync System:
Internal Internal
Video Output:
Digital 8, 10 or 12 bit Raw Data or RGB 8 bit Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
Interface:
PoE: IEEE802.3af CLASS3(1000BASE-T) PoE: IEEE802.3af CLASS3(1000BASE-T)
Protocol:
GenICam™ 2.0 and GigE Vision® 1.2 compliant GenICam™ 2.0 and GigE Vision® 1.2 compliant
ALC:
Auto iris lens, electronic iris and AGC (ON/OFF) Auto iris lens, electronic iris and AGC (ON/OFF)
Communication:
UART Communication through Ethernet Port UART Communication through Ethernet Port
Trigger Mode:
Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure) Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure)
Minimum Illumination:
0.58 Lux @ F1.2
25.75 Lux @ F1.2
0.96 Lux @ F1.2
24.70 Lux @ F1.2
0.41 Lux @ F1.2
15.49 Lux @ F1.2
0.16 Lux @ F1.2
7.27 Lux @ F1.2
Gain:
0 to 20.4 dB 0 to 20.4 dB
S/N Ratio:
8bit ≤ 3 Digit (Gain 0dB); 10bit ≤ 12 Digit (Gain 0dB); 12bit ≤ 48 Digit (Gain 0dB) 8bit ≤ 3 Digit (Gain 0dB); 10bit ≤ 12 Digit (Gain 0dB); 12bit ≤ 48 Digit (Gain 0dB)
Gamma:
1.0 (Factory default) or Downloadable gamma table 1.0 (Factory default) or Downloadable gamma table
AOI Function:
Programmable AOI setting via the communication Programmable AOI setting via the communication
Smear Reduction:
Selectable ON/OFF via the communication Selectable ON/OFF via the communication
Color Interpolation:
Color Camera: Available on RGB output Color Camera: Available on RGB output
White Balance:
Color Camera: Auto, manual and push-to-set white balance
(available on both Raw data output and RGB output)
Color Camera: Auto, manual and push-to-set white balance
(available on both Raw data output and RGB output)
DC Iris Lens Control:
Auto iris lens connector, DC drive type Auto iris lens connector, DC drive type
User Congurable Board:
FPGA: XILINX FPGA (XC3SD1800A, CSG484 package), 1800K gates
DDR2: W9725G6JB-25 (Winbond), 32MB
EEPROM: M95512-RMN6TP (ST Micro), 512KB
CongurationROM: M25P80-VMP6G (ST Micro), 8MB
FPGA: XILINX FPGA (XC3SD1800A, CSG484 package), 1800K gates
DDR2: W9725G6JB-25 (Winbond), 32MB
EEPROM: M95512-RMN6TP (ST Micro), 512KB
CongurationROM: M25P80-VMP6G (ST Micro), 8MB
Lens Mount:
C-Mount C-Mount
Optical Filter:
No IR Cut Filter (IR Cut Filter) No IR Cut Filter (IR Cut Filter)
Optical Center Accuracy:
Positional Accuracy in H and V directions: +/- 0.3mm
Rotational Accuracy of H and V: +/- 1.5 deg.
Positional Accuracy in H and V directions: +/- 0.3mm
Rotational Accuracy of H and V: +/- 1.5 deg.
Shock:
70G (3 directions, 3 times each) 70G (3 directions, 3 times each)
Vibration:
10G (20 to 200Hz) 10G (20 to 200Hz)
Input Voltage:
+10.8 ~ 26.4Vdc via Power/IO Connector or Power Over Ethernet +10.8 ~ 26.4Vdc via Power/IO Connector or Power Over Ethernet
Dimensions:
50 (W) x 50 (H) x 53.4 (D) mm
(1.96” x 1.96” x 2.10”)
50 (W) x 50 (H) x 53.4 (D) mm
(1.96” x 1.96” x 2.10”)
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 52 53

Comentarios a estos manuales

Sin comentarios