
www.SentechAmerica.com12
Sentech America
1345 Valwood Parkway
Suite 320
Carrollton, TX 75006
USA
Toll Free:
(877) 736-8324
Telephone:
(972) 481-9223
Fax:
(972) 481-9209
Tele: (972) 481-9223; Toll Free in USA: (877) 736-8324 13
STC-GE (GigE Cameras)
The Sentech series of GigE cameras will
have VGA, XGA, SXGA, UXGA and QSXGA
(5 MegaPixel) resolutions. The Sentech GigE cameras will
be completely compliant to the AIA GigE Vision standards
and GeniCam standards. Three di erent hardware con-
gurations will be available, from a standard GigE type
camera to a con guration which will allow the user an
unprecedented level of control.
Coming Soon .... See pp. 14-17
New Products in 2009
Public Transportation:
Ruggedized Color Camera with special
DSP pro le. Features volume controlled
microphone and a power indicator LED.
Available in dome and wedge housings
in either high impact resistant plastic or
metal. See pp. 78-81
STC-AF133 (HD Auto Focus Block Camera)
This HD Auto Focus block camera with 720p digital out,
outputs a true 16 x 9 aspect ratio. It features full zoom
and auto focus functionality for a 25cm (w/ close up lens)
to in nite focal distance. User programmable over a
RS232 connection. All special “Low Vision” processing (ie:
Super High Contrast Mode, Pseudo Colors, High Contrast,
anti-ghosting, etc.) are done on the cameras. Available
with or without a close up lens.
Coming Soon....
Custom Cameras
STC-CL232A/STC-CLC232A
(CameraLink® Camera)
A full featured, cost e ective UXGA progressive scan
CameraLink® cube camera with 1/1.8” CCD. Features
a full resolution 30 fps UXGA output, partial scanning,
triggering, and reset capabilities. Very small: 28(W) x
28(H) x 53.5(D) mm.
See pp. 54-55
Introduction
Introduction
Day/Night IR Cameras:
Ruggedized housing, clearly illuminates
1,200 sq. ft. Features volume controlled
microphone and a power indicator LED.
See pp. 78-81
STC-CL500A / STC-CLC500A:
This 2/3” 5.0 MegaPixel QSXGA
CameraLink® camera features a 15
fps output speed in a very small
package. The entire camera is 35(W)
x 35(H) x 40.7(D) mm. It has a mini-
CameraLink® connector and RS232
based control communications, allowing
communication speeds at either 9,600 or
38,400 baud. See pp. 52-53
STC-RCL33A
STC-RCLC33A
This VGA CameraLink® super small
remote head camera was designed
for an application with severe size and
weight restraints. It features two head
styles, the rst being only 17(W) x 17(H)
x 10.5(D) mm, the second (shown) is
12(W) x 12(H) x 44(D) mm. The CCU for
this camera is only 28 x 28mm. This is
a 10 bit CameraLink® camera with an
output up to 90 fps. See pp. 56-57
ubl
Does your
application
require a custom
designed camera?
If so, please give
Sentech a call and we
will see if we can help.
In 1987 Sentech started
by developing custom
cameras in Japan for
some of the giant
Japanese electronics
manufacturers. Here
are just a few examples
of the custom cameras
we have built —
everything from
custom lenses to 2D
Matrix scanners to
digital smart cameras.
USB 2.0 Hard Trigger Type Cameras
(Includes Hardware & Software Triggers)
Sentech’s “ASH” series of USB trigger
cameras are truly the rst USB cameras with full
triggering capabilities. This series of cameras allows
control of USB latency, removing the traditional obstacle
for using USB cameras in Machine Vision applications.
This control is provided via a series of signal controls
which can be used in the system design. The “ASH”
series features VGA, XGA, SXGA, and UXGA cameras, all
with lock down mini USB connectors as well as “USB
over Hirose” connectors. These cameras also have four
user programmable I/Os. A complete SDK for trigger
application development is also provided.
See pp. 30-33 & 38-41
Comentarios a estos manuales