
Sentech STC-400 Series Application Manual
Toll Free (877) 736-8324 • Fax (972) 446-0056 • www.SentechAmerica.com
SEN
TECH
PREFACE
This camera is designed for visual measurement and microscopic applications. Its very small package design allows it to be installed in places with very
limited space. The video output signal is obtained simply by applying 12 volt DC power supply. Various combinations of performance parameters can be
obtained by setting the internal switches. These settings will enable the camera to be suitable for many different applications.
CONTENTS OF BOX
A. Standard Contents
Content Quantity
STC-400 Series Camera 1 Each
Instruction Sheet 1 Each
B. Optional Items
• HR-10A-10P-12S Power Connector
• Cable Assembly - Available in 2 meter, 3 meter, 5 meter, 10 meter, and custom lengths
• TP-300 Tripod Adapter with 1/4" 20 UNC screw thread hole
FEATURES
STC-400 Series Cameras
The STC-400 series is a collection of products to fit a wide variety of applications. The STC-400 comes in 1/3 and
1/2-inch CCD formats and in compact , remote head, and “L” shaped camera housings. With selectable shutter
speeds from 1/60th. to 1/10,000th of a second, the STC-400 can capture scenes and virtually any speed crisply and
clearly.
- High Picture Quality - 1/2 or 1/3-inch, 380,000 pixel CCD, High resolution picture of 570(H) x 485 (V) TV
lines at frame accumulation mode.
- Extremely Small Size - 31(W) x 29(H) x 73(D) mm, Weight 85g (STC-400) [1.22(W) x 1.14(H) x 2.87(D)
inch, Weight 3.0 oz]
- Clock Out - 14.31818MHz
- Electronic Shutter - User selectable from 1/60 to 1/10,000 of a second. For clear image of a high-speed
moving target.
- Selectable Gamma - 0.45 or 1
- Selectable Gain - Gain is user selectable from 0 to 25dB via the rear panel.
- Selectable Light Accumulation - Field or frame accumulation mode is selectable by the internal switch.
All STC-400 series cameras are available in EIA and CCIR formats
3
Comentarios a estos manuales