SenTech STC-400 SeriesL Manual de usuario descargar pdf (Pagina 20)

Toll Free (877) 736-8324 • Fax (972) 446-0056 • www.SentechAmerica.com20

REMOTE MICRO HEAD CAMERAS

General Specifications:

Image Sensor: 1/4

Interline Transfer CCD, 768(H) x 494(V)

Signal Format: NTSC or PAL Available

Processing: 10 bit DSP (user programmable)

Horizontal Frequency: 15.734kHz

Sync System: Internal or External (model dependant)

Min. Illumination: 1 Lux at F1.2 (AGC-ON) (50 IRE)

S/N Ratio: More than 48dB (AGC-OFF)

Gamma: 0.45 or 1.0 (DSP Adjustable)

White Balance: ATW / Manual

AGC: ON / OFF Selectable

Electronic Shutter: Electronic Shutter: 1/60 – 1/10,000

Fixed Shutter: Low Speed Shutter: 2FLD – 16FLD (8 steps)

High Speed Shutter: 1/60 – 1/10,000 (8 steps)

Output Signals Video: 1.0Vp-p 75 ohms, Y/C: 0.7Vp-p 75 ohms

Back Light: Back Light Compensation at Electronic Shutter

Negative / Positive: Selectable

Power: DC12V, Consumption=250mA

Operating Temp.: -10º C to +40º C (14º F to 104º F)

Dimensions (mm): 51(W) x 51 (H) x 55.5(D) (2

x 2

x 2.2

)

Weight: 205 g (7.2 oz)

The Sentech STC-R640CC / CT is a unique concept for Remote Micro Head cameras. We have

taken our base single chip color cameras, the STC-620CT / CC and STC-640 CT / CC, and

simply “remoted” the CCD head. You will get the same exceptional color reproduction and user

friendly DSP (digital signal processing) control via the RS232 port. The CCU for this camera is

only 2" x 2" x 2.2" in size, approximately 60% smaller than most competitive CCUs. Sentech is

providing this camera to you far below the competitor’s prices. Better quality, better perfor-

mance, better pricing and better support.

STC-R640CC / CT

CC Model

CT Model

Available in both

NTSC & PAL

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Sin comentarios

SenTech STC-400 SeriesL Manual de usuario Pagina 20