SenTech STC-GE83A Manual de usuario Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 51
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
www.SentechAmerica.com
19
Standard Models (Includes Software Trigger)
Monochrome
Color
STC-TB33USB-A or B
STC-TC33USB-A or B
STC-TB83USB-A or B
STC-TC83USB-A or B
STC-TB133USB-A or B
STC-TC133USB-A or B
STC-TB152USB-A or B
STC-TC152USB-A or B
STC-TB202USB-A or B
STC-TC202USB-A or B
Resolution:
Full
1/2 Partial
1/4 Partial
VGA (0.3 Megapixel)
640 (H) x 480 (V)
640 (H) x 224 (V)
640 (H) x 80 (V)
XGA (0.8 Megapixel)
1024 (H) x 768 (V)
1024 (H) x 344 (V)
1024 (H) x 136 (V)
SXGA (1.25 Megapixel)
1280 (H) x 960 (V)
1280 (H) x 440 (V)
1280 (H) x 168 (V)
SXGA (1.3 Megapixel)
1280 (H) x 1024 (V)
1280 (H) x 476 (V)
1280 (H) x 184 (V)
UXGA (2 Megapixel)
1600 (H) x 1200 (V)
1600 (H) x 544 (V)
1600 (H) x 208 (V)
Imager Sensor:
1/3” CCD (ICX424AL)
1/3” CCD (ICX424AQ)
1/3” CCD (ICX204AL)
1/3” CCD (ICX204AK)
1/3” CCD (ICX445AL)
1/3” CCD (ICX445AQ)
1/2” CCD (ICX205AL)
1/2” CCD (ICX205AK)
1/1.8” CCD (ICX274AL)
1/1.8” CCD (ICX274AQ)
Signal Format:
Progressive: Monochrome or Color Progressive: Monochrome or Color
Maximum Frame Rates:
Full Scan
1/2 Partial
1/4 Partial
60 fps
120 fps
240 fps
30 fps
60 fps
120 fps
22 fps
44 fps
89 fps
19 fps
38 fps
77 fps
15 fps
30 fps
60 fps
Pixel Clock Frequencies:
24.5454 MHz 29.5 MHz 36.818 MHz
Trigger Mode:
Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop) Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop)
Trigger Controls:
Integration End Signal, Readout Signal Control, HD Trigger Timing Control Integration End Signal, Readout Signal Control, HD Trigger Timing Control
Scanning Methods:
Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning (B/W models) Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning (B/W models)
Sync System:
Internal Sync Internal Sync
Shutter Speed:
Auto / Manual (Set via Software) Auto / Manual (Set via Software)
Minimum Illumination:
0.08 Lux @ F1.2, 50 IRE
2.24 Lux @ F1.2, 50 IRE
0.11 Lux @ F1.2, 50 IRE
5.28 Lux @ F1.2, 50 IRE
0.18 Lux @ F1.2, 50 IRE
3.23 Lux @ F1.2, 50 IRE
0.12 Lux @ F1.2, 50 IRE
2.7 Lux @ F1.2, 50 IRE
0.11 Lux @ F1.2, 50 IRE
1.39 Lux @ F1.2, 50 IRE
Extended Low Light:
Extended Low Light Capability via Software Trigger Extended Low Light Capability via Software Trigger
Gain:
Auto / Manual (Analog and Digital Gains set independently via Software) Auto / Manual (Analog and Digital Gains set independently via Software)
Gamma:
Manual (Set via Software) Manual (Set via Software)
Lens Mount:
CS Mount / Micro Lens Mount CS Mount / Micro Lens Mount C-Mount
White Balance:
Auto / Manual / One-Shot (Set via Software) Auto / Manual / One-Shot (Set via Software)
Video Output:
USB 2.0 High Speed USB 2.0 High Speed
Connectors:
Standard USB (Lock Down Type Available) Standard USB (Lock Down Type Available)
Shock and Vibration:
Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each) Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each)
Input Voltage:
+5Vdc via USB Connector +5Vdc via USB Connector
Power Consumption:
1.75W, < 350mA 1.60W, < 320mA 2.15W, < 430mA 2.25W, < 450mA 2.80W, < 560mA
Operating Temperature:
0° ~ 40°C (32° ~ 104°F) 0° ~ 40°C (32° ~ 104°F)
Storage Temperature:
-30° ~ 65°C (-22° ~ 149°F) -30° ~ 65°C (-22° ~ 149°F)
Dimensions:
Cased: 51 (W) x 51 (H) x 44.3 (D) mm (2” x 2” x 1.74”)
Board: 45 (W) x 45 (W) x Var. (1.77” x 1.77” x Var.)
Cased: 51 (W) x 51 (H) x 44.3 (D) mm (2” x 2” x 1.74”)
Board: 45 (W) x 45 (W) x Var. (1.77” x 1.77” x Var.)
Weight:
Cased: Approximately 145g (5.11oz), Board Approximately: 45g (1.58oz) Cased: Approximately 145g (5.11oz), Board Approximately: 45g (1.58oz)
USB 2.0 Standard Camera
Comparison Chart
usb 2.0 | Speci cations
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 50 51

Comentarios a estos manuales

Sin comentarios