
www.SentechAmerica.com
90
1345 Valwood Parkway, Suite 320
Carrollton, TX 75006
SEN
TECH
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
91
These cameras o er a remote
head, micro-packaged 1/4",
color CCD in a variety of
cable lengths and head
orientations. Best of all,
Sentech’s remote head
cameras are only a
fraction of what
conventional
remote
head
cameras
cost.
STC-R640AS STC-R640CC
STC-R640CT
Straight
Head
STC-R640HD
Top of
Scene
STC-R640UHD
“Right Angle”
Heads
Top of
Scene
STC-R640LHD
Models
STC-R640 STC-R645
Image Sensor:
1/4” CCD (ICX228AK) 1/4” CCD (ICX229AK)
Horizontal Resolution:
480 TV Lines
Signal Format:
NTSC PAL
Scanning Method:
2:1 Interlace
Frame Rate:
30 fps
E ective Picture Element:
768 (H) x 494 (V) 752 (H) x 582 (V)
Horizontal Frequency:
15.734 kHz 15.625 kHz
Vertical Frequency:
59.94 Hz 50.00 Hz
Gain:
AGC / Manual
S/N Ratio:
> 48dB (AGC:O )
Gamma:
0.45 (default), DSP Adjustable (32 steps)
Sync:
Internal/External VS (CT model) / HD/VD (CC model)
Minimum Illumination:
1.99 Lux @ F1.2, 50 IRE 2.15 Lux @ F1.2, 50 IRE
White Balance:
Manual / Full Auto / Push-to-Set (CC and CT models only)
Serial I/O:
RS-232C Controllable (for DSP)
Electronic Shutter:
1/60 (1/50) ~ 1/10,000 (8 steps)
Electronic Iris:
1/60 (1/50) ~ 1/10,000
DSP:
10-Bit, User Programmable
Video Output:
Composite and Y/C (available on select models)
Video Output Level:
1.0Vp-p 75 Ω
Y/C Output Level:
0.7Vp-p 75 Ω
Lens Mount:
Micro and C-Mount (w/ adapter)
Input Voltage:
+ 12Vdc ± 10%
Power Consumption:
2.64W; 220mA
Operating Temperature:
-10° ~ 45°C (14° ~ 113°F)
Dimensions:
- Cased Camera CCU
- Straight Finished Head
51 (W) x 51 (H) x 55.5 (D) mm (2.04” x 2.04” x 2.22”)
10mm Ø (0.39” Ø)
Weight:
Cased Camera CCU: 190g (6.7 oz)
Cables Power Supplies Lens Mount Lenses
CAB-3BNC 45-601 LEN-R640-CL Model No. Focal Length
CAB-6BNC 45-752 LEN-R640-L2.7 2.7mm
CAB-6Y/C 45-752A
Programming Jig LEN-R640-L4 4mm
12W-3.6PS PWR-PSISP-6 Jig-ColorUSB LEN-R640-L8 8mm
PWR-PSISP-6YC6 Jig-630 LEN-R640-L16 16mm
LEN-R640-L1611 16mm
LEN-R640-L2511 25mm
Remote Head Color Cameras
R640AS
Analog Control Knobs for DSP Control•
- Gain, Color, Sharpness and Gamma
BNC for Video Out•
12 Pin Hirose • (Power & Y/C Out)
R640CC
Push-to-Set White Balance Switch•
RS232 Serial I/O for DSP Programming•
BNC for Video Out & Y/C Connector for Y/C Out•
12 Pin Hirose • (Power In, Y/C Out & HD/VD In)
R640CT
Terminal Strip Power•
Push-to-Set White Balance Switch•
RS232 Serial I/O for DSP Programming•
BNC for Video Out & Y/C Connector for Y/C Out•
BNC for VS Sync•
NTSC & PAL
remote head | Accessories
remote head | Specifi cations
Analog Remote Head Series
Comentarios a estos manuales