SenTech STC-GE83A Manual de usuario descargar pdf (Pagina 16)

www.SentechAmerica.com

Standard Models

Monochrome

Color

STC-GE33A

STC-GEC33A

STC-GE83A

STC-GEC83A

STC-GE152A

STC-GEC152A

STC-GE202A

STC-GEC202A

STC-GE500A

STC-GEC500A

Resolution:

VGA (0.3 Megapixel) XGA (0.8 Megapixel) SXGA (1.3 Megapixel) UXGA (2 Megapixel) QSXGA (5 Megapixel)

Image Sensor:

1/3” CCD (ICX424AL)

1/3” CCD (ICX424AQ)

1/3” CCD (ICX204AL)

1/3” CCD (ICX204AQ)

1/2” CCD (ICX205AL)

1/2” CCD (ICX205AK)

1/1.8” CCD (ICX274AL)

1/1.8” CCD (ICX274AQ)

2/3” CCD (ICX625AL)

2/3” CCD (ICX625AQ)

Signal Format:

Progressive: Monochrome or Color Progressive: Monochrome or Color

Frame Rate:

30, 60, 90fps 36fps 19fps 15fps

Active Picture Element:

648 (H) x 494 (V) 1024 (H) x 768 (V) 1360(H) x 1040 (V) 1624 (H) x 1236 (V) 2448 (H) x 2058 (V)

Vertical Frequency:

89.91 Hz 36.42 Hz 19.26 Hz 15.32 Hz 14.97 Hz

Horizontal Frequency:

47.2028 kHz 28.9907 kHz 20.5688 kHz 19.1761 kHz 31.1284 kHz

Pixel Clock Frequencies:

36.8181 MHz 36.8181 MHz 59.890898 MHz

Scanning Method:

Full, Partial (1/2, 1/4) and Variable Partial Scanning (B/W models) Full, Partial (1/2, 1/4) and Variable Partial Scanning (B/W models)

Sync System:

Internal Internal

Video Output:

Digital 8, 10 or 12 bit Raw Data or RGB 8 bit Digital 8, 10 or 12 bit Raw Data or RGB 8 bit

Interface:

IEEE802.3 (1000BASE-T) IEEE802.3 (1000BASE-T)

Protocol:

GenICam™ and GigE Vision® 1.0 compliant GenICam™ and GigE Vision® 1.0 compliant

ALC:

Auto iris lens, electronic iris and AGC (ON/OFF) Auto iris lens, electronic iris and AGC (ON/OFF)

Communication:

Through Ethernet Port Through Ethernet Port

Trigger Mode:

Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure) Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure)

Shutter Speed:

Long Exposure ~ 1/120,320 seconds Long Exposure ~ 1/120,320 seconds Long Exposure ~ 1/195,722 seconds

Minimum Illumination:

0.13 Lux @ F1.2 / 0.12 Lux @ F1.2 0.14 Lux @ F1.2 / 0.14 Lux @ F1.2 0.13 Lux @ F1.2 / 0.11 Lux @ F1.2 0.06 Lux @ F1.2 / 0.085 Lux @ F1.2 0.32 Lux @ F1.2 / 0.24 Lux @ F1.2

Gain:

0 to 27 dB 0 to 27 dB

S/N Ratio:

8bit ≤ 3 Digit (Gain 0dB); 10bit ≤ 12 Digit (Gain 0dB); 12bit ≤ 48 Digit (Gain 0dB) 8bit ≤ 3 Digit (Gain 0dB); 10bit ≤ 12 Digit (Gain 0dB); 12bit ≤ 48 Digit (Gain 0dB)

Gamma:

Gamma 1.0 (Factory default) or uploadable gamma table Gamma 1.0 (Factory default) or uploadable gamma table

ROI Function:

Programmable ROI setting via the communication Programmable ROI setting via the communication

Smear Reduction:

Selectable ON/OFF via the communication Selectable ON/OFF via the communication

Color Interpolation:

Available on RGB output Available on RGB output

White Balance:

Auto, manual and push-to-set white balance

(is available on both Raw data output and RGB output)

Auto, manual and push-to-set white balance

(is available on both Raw data output and RGB output)

DC Iris Lens Control:

Auto iris lens connector, DC drive type Auto iris lens connector, DC drive type

Lens Mount:

C-Mount C-Mount

Optical Filter:

No IR Cut Filter (IR Cut Filter) No IR Cut Filter (IR Cut Filter)

Optical Center Accuracy:

Positional Accuracy in H and V directions: +/- 0.31mm

Rotational Accuracy of H and V: +/- 2.1 deg.

Positional Accuracy in H and V directions: +/- 0.31mm

Rotational Accuracy of H and V: +/- 2.1 deg.

Shock:

70G (3 directions, 3 times each) 70G (3 directions, 3 times each)

Vibration:

10G (20 to 200Hz) 10G (20 to 200Hz)

Input Voltage:

10.8 to 26.4Vdc 10.8 to 26.4Vdc

Dimensions:

35 (W) x 35 (H) x 50.6 (D) mm

(1.37” x 1.37” x 1.99”)

35 (W) x 35 (H) x 50.6 (D) mm

(1.37” x 1.37” x 1.99”)

50 (W) x 50 (H) x 53.4 (D) mm

(1.96” x 1.96” x 2.10”)

GigE Vision

Standard

Camera Comparison Chart

gige | Speciﬁ cations

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 50 51

Comentarios a estos manuales

Sin comentarios

SenTech STC-GE83A Manual de usuario Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad SenTech STC-GE83A